Yihua has carried out factory testing on a DAF Flotation System prepared for shipment to Estonia. The inspection is designed to verify equipment assembly, mechanical operation, control functions, and water circulation before the system leaves the manufacturing facility.
Factory Acceptance Testing is particularly important for international wastewater projects. Identifying installation or control issues before shipment reduces uncertainty during site commissioning and gives the receiving team a clearer basis for equipment installation, operation, and maintenance.
Mechanical and Structural Inspection
The testing process begins with a visual and mechanical inspection of the flotation tank, access points, piping interfaces, supports, skimming mechanism, sludge collection components, and protective finishes. Fasteners, seals, moving parts, and connection points are checked against the approved equipment configuration.
The surface skimmer is operated to confirm smooth travel and stable contact with the collection area. Drive direction, alignment, and abnormal vibration are also reviewed. These checks help prevent mechanical problems that could otherwise appear after overseas delivery.
Water Circulation and Dissolved Air Checks
The DAF Flotation System is tested with clean water to verify pumps, pipelines, valves, pressure instruments, and circulation paths. The recycle system is checked for stable operation, while the dissolved air components are inspected for leakage and correct response.
Water testing can confirm whether the equipment circulates and discharges as intended, but it cannot prove final pollutant removal performance. Actual treatment efficiency depends on the wastewater composition, chemical conditioning, recycle settings, hydraulic loading, and floc quality at the Estonia project site.
For this reason, site commissioning should include representative wastewater tests and adjustment of coagulant, flocculant, recycle flow, and sludge removal frequency.
![]()
Electrical Control and Safety Verification
The control panel is energized to verify motor control, operating sequences, status indicators, emergency stop functions, and protective interlocks included in the equipment scope. Pumps, skimmer drives, and other connected components are started individually before the complete operating sequence is reviewed.
Cable identification and equipment labels are checked to support faster installation after delivery. Clear labeling is especially valuable when the site team must connect a packaged treatment unit without direct access to the factory assembly process.
Preparing the DAF System for International Shipment
After testing, residual water should be drained from the tank, pumps, pipelines, and pressure components. This step is important for shipment to Estonia because trapped water may create corrosion, contamination, or freezing risks during transport and storage in cold conditions.
Loose components are secured, exposed interfaces are sealed, and sensitive instruments are protected against moisture and impact. Installation drawings, operating guidance, packing information, and testing records should accompany the equipment so that the receiving team can verify the delivered scope.
Conclusion
Factory testing helps confirm that the DAF Flotation System is mechanically complete, electrically functional, and ready for international delivery to Estonia. It does not replace wastewater commissioning, but it reduces avoidable site work and supports a smoother transition from factory assembly to project operation. Final performance will depend on correct installation, representative water testing, chemical optimization, and trained operation at the treatment plant.
For more information, please contact: winnie@yihuaep.com
![]()
Prev: None